Arming Devices

Keypad (CMA 601)

The Keypad Model CMA 601 is a battery operated, wireless alphanumeric keypad designed for configuring/programming and operating Videofied security systems. The keypad consists of a liquid-crystal (LCD) display with two 16-character lines, multifunction push buttons, a panic alarm button, a built-in sounder, and S2 View ®  spread spectrum, videofied, interactive, encrypted wireless circuitry for secure two-way communication with the control panel. The LCD display  provides easy to read  messages and goes out after 30 seconds of no keypad activity, to conserve battery power.  Pressing any button  (except the panic alarm button) restores the display.  Easy to understand display text guides you through programming, prompting you for simple yes/no or data entry responses. The left and right arrow buttons cycle through menus or values until the desired choice is displayed. Alphabetical entries are done using the 0 – 9 buttons and can be in lowercase, uppercase, or a combination of both.  Complete punctuation symbols are also available for data entries such as website/IP addresses and component location naming. *Batteries are included

$260.00 

Remote (RC 601)

Battery operated, wireless remote control designed for basic operation of Videofied security systems. The keyfob consists of four push buttons for system arming, disarming, panic alarms, and uses S 2 View ® Spread Spectrum, Videofied, interactive, encrypted wireless circuitry for secure two-way communication with the control panel.  Operating the system with the keyfob can normally be done from within or just outside the premises and requires no access code entries.  Pressing the ON button  arms the whole system. Pressing the OFF button disarms the system. Pressing the 1 or 2 buttons arms specific areas of the system as determined by system configuration/programming. The keyfob generates a panic alarm when the 1 or 2 buttons are pressed and held for five seconds. 1-key is panic alarm with siren, 2-key is for silent panic alarm. The keyfob is powered by one 3V Lithium battery that will last approximately 10 years or more, depending on the amount of use. The keypad transmits the battery status with each activation. *Batteries are included

$87.00 

Prox Card Arming Station (BR 651)

Battery operated, wireless Proximity Reader designed for arming and disarming operation of Videofied security systems.  The Proximity Reader consists of two LED’s for status information,  a built in sounder, S2View Spread Spectrum, interactive,  encrypted wireless circuitry for secure two-way communication with the  control panel, and is multi badge programmable.  The LED display provides status information of arming, disarming, partial arming, tamper fault, and maintenance.  The Proximity Reader is typically installed near entry/exit doors to allow system users enough time to arm and exit the premises, and to enter and disarm the system before time delays expire.  When the system is armed, the built in sounder emits short beeps and one red and one green LED flash to identify arming.  Upon entering the armed premises and swiping a programmed badge, the built in sounder emits short beeps and two green LED flashes to identify disarming.  A dual tamper function provides detection for both Badge Reader cover and wall tamper.  *Batteries and 1 prox tag are included

$142.00 

Pro Tags 10 pack (VT 100)

Our Proximity Tags are small, rugged and easy to use. They can be placed on a key chain for easy access. The user simply places the prox-tag next to the reader to arm/disarm the system. The prox-tags have no batteries and are rugged enough to last for years.

$56.00 

 

Weather Resistant Back Panel

 A weather resistant 8″X6″ back panel to house your outdoor arming device. Comes with mounting screws and the ability to lock.

$70.00 

 

**A monitoring plan is required  for any Videofied product to work. Each monitoring plan is customized to meet your individual needs. Please call us for details and pricing @ 877•411•2471.